B13 Sr20ve swap? - SR20nation.com - The Un-official Forum For SR20's

PoPpiN VvL · 12-18-2009, 12:14 AM

Im a honda head and im interested in building up a b13 i was wondering what parts would be needed to swap out a stock b13 with a sr20ve motor all comments are appreciated thanks

SlickSE-R · 12-18-2009, 09:58 AM

welcome new guy, basically, just the VE motor, a msd box to activate the vvl solonoids, calum ecu or jwt ecu. thats about it.

PoPpiN VvL · 12-18-2009, 04:49 PM

Thanks glad to be here, I hear you need harnesses and axles as well

2dr_sentra · 12-19-2009, 11:51 AM

Quote:

Originally Posted by PoPpiN VvL

Thanks glad to be here, I hear you need harnesses and axles as well

Do you have an SE-R? you use your original harness and transmission if so

PoPpiN VvL · 12-20-2009, 03:21 AM

I actually dont have an SER so i would need a harness from an SER im guessing

2dr_sentra · 12-20-2009, 04:08 PM

Quote:

Originally Posted by PoPpiN VvL

I actually dont have an SER so i would need a harness from an SER im guessing

Heres everything you will need -

http://www.sr20nation.com/showthread.php?t=266

b13ken · 01-02-2010, 12:41 AM

Its not really that easy lol. I just went through the VVL swap on my b13 and it didnt go as planned haha.

TheStigP11GT · 05-29-2010, 05:42 PM

For a straight swap you can use the VE engine, harness and ecu, If your tuning the engine then there is many ways you can go, Use the DE ecu and use a Greddy MSS to manage your cam switching, but the DE ECU will need a remap. You can use a piggy back like Dastek for your map, or send your ECU to bull in greece and he can work your ECU for ya.

If you want to have a good set up for the NeoVVL engine, do your homework before you start, these aint honda engines, they are very different...extra homework will be worth it.

12-18-2009, 12:14 AM	#1
PoPpiN VvL Newbie iTrader: (0) Join Date: Dec 2009 Posts: 3	B13 Sr20ve swap? Im a honda head and im interested in building up a b13 i was wondering what parts would be needed to swap out a stock b13 with a sr20ve motor all comments are appreciated thanks

12-18-2009, 09:58 AM	#2
SlickSE-R This site rocks! iTrader: (0) Join Date: Jun 2009 Location: Orlando, FL Posts: 25	welcome new guy, basically, just the VE motor, a msd box to activate the vvl solonoids, calum ecu or jwt ecu. thats about it. __________________ 1995 200SX SE-R w/ Bolt ons

05-29-2010, 05:42 PM	#8
TheStigP11GT VVL Drooler iTrader: (0) Join Date: May 2010 Location: Edinburgh, UK Posts: 4	For a straight swap you can use the VE engine, harness and ecu, If your tuning the engine then there is many ways you can go, Use the DE ecu and use a Greddy MSS to manage your cam switching, but the DE ECU will need a remap. You can use a piggy back like Dastek for your map, or send your ECU to bull in greece and he can work your ECU for ya. If you want to have a good set up for the NeoVVL engine, do your homework before you start, these aint honda engines, they are very different...extra homework will be worth it. __________________ http://www.neovvl.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-18-2009, 04:49 PM	#3
PoPpiN VvL Newbie iTrader: (0) Join Date: Dec 2009 Posts: 3	Thanks glad to be here, I hear you need harnesses and axles as well

12-20-2009, 03:21 AM	#5
PoPpiN VvL Newbie iTrader: (0) Join Date: Dec 2009 Posts: 3	I actually dont have an SER so i would need a harness from an SER im guessing

01-02-2010, 12:41 AM	#7
b13ken Newbie iTrader: (0) Join Date: Sep 2009 Location: Tampa florida Posts: 20	Its not really that easy lol. I just went through the VVL swap on my b13 and it didnt go as planned haha.